Tiandy 4-Port 10/100 PoE Switch with 2 Uplinks – 55W
R699.00 Incl. VAT
The Tiandy TC-P3S06 Spec:F/0420/AT/55 is a 6-port Fast Ethernet PoE switch designed to power up to four compatible IP cameras or other PoE devices while providing two dedicated network uplink ports. Its 55W shared PoE budget, automatic PoE watchdog and selectable network modes make it a practical choice for compact CCTV installations.
- 4 PoE ports: 10/100Mbps RJ45 connections supporting IEEE 802.3af and 802.3at (PoE+).
- 2 uplink ports: Dedicated 10/100Mbps RJ45 connections for an NVR, router or upstream network.
- 55W total PoE budget: Supports up to 30W on an individual PoE+ port, subject to the combined 55W limit.
- Three operating modes: Default, VLAN isolation and Extend, selected using the physical DIP switch.
- 220m Extend Mode: Supports extended network transmission on PoE ports 1–4 at a reduced 10Mbps link speed.
- PoE watchdog: Automatically monitors and restarts PoE connections in VLAN and Extend modes.
- Port priority: Prioritises PoE ports in the sequence 1 > 2 > 3 > 4.
- Protection: 4kV common-mode surge protection and ESD protection rated at 8kV air / 6kV contact.
- Power: AC 100–240V input, with a compact 200 × 118 × 44mm chassis.
Description
Tiandy TC-P3S06 Spec:F/0420/AT/55 – 4-Port PoE Switch with 55W Power Budget
The Tiandy TC-P3S06 provides a straightforward way to connect and power a small network of IP surveillance cameras without requiring a separate power supply at every camera. Four 10/100Mbps Ethernet ports combine data connectivity with IEEE 802.3af/at Power over Ethernet, while two additional 10/100Mbps RJ45 uplink ports provide connections to a network video recorder, router or existing network infrastructure.
Its total PoE power budget is 55W, with support for devices requiring up to 30W through an individual IEEE 802.3at port. The 55W limit applies across all four PoE ports combined, so the power requirements of connected cameras must be considered together. This is particularly important when using cameras with supplementary illumination, motorised functions or other features that increase power consumption.
Three Network Modes for Different CCTV Installations
A physical three-position DIP switch provides a choice of network operating modes without requiring software configuration:
- Default Mode: All six ports communicate normally at automatically negotiated 10/100Mbps speeds. PoE watchdog functionality is disabled.
- VLAN Mode: PoE ports 1–4 are isolated from one another and can communicate through uplink ports 5 and 6. PoE watchdog functionality is enabled, making this mode useful when camera-to-camera communication is unnecessary.
- Extend Mode: PoE ports 1–4 operate at a forced 10Mbps link speed to support extended transmission distances of up to 220 metres. PoE watchdog functionality is enabled.
The extended transmission mode is useful when camera locations exceed the normal 100-metre Ethernet cabling distance. However, the reduced 10Mbps connection speed must be suitable for the connected camera’s bandwidth requirements, and achievable distance depends on cable quality and installation conditions.
PoE Watchdog and Power Prioritisation
When VLAN or Extend Mode is selected, the switch enables its PoE watchdog function to monitor connected PoE equipment and automatically restart an unresponsive connection. This can help recover certain camera connectivity problems without requiring someone to manually disconnect the device’s power.
PoE power priority follows port order, with port 1 receiving the highest priority and port 4 the lowest. This allows installers to place more important cameras on higher-priority ports when allocating the available 55W power budget.
Network Connections and Electrical Protection
The TC-P3S06 uses store-and-forward packet switching, automatic MDI/MDIX cable detection and IEEE 802.3x flow control. Its switching capacity is 1.2Gbps, with a packet forwarding rate of 0.8928 million packets per second.
The switch incorporates 4kV common-mode Ethernet surge protection, together with electrostatic discharge protection rated at 8kV for air discharge and 6kV for contact discharge. Front-panel indicators provide visibility of power, network activity, selected operating mode and PoE status.
Power is supplied through an AC 100–240V input. The unit measures 200 × 118 × 44mm and weighs approximately 540g, making it suitable for compact equipment installations with adequate ventilation.
Important: This F/0420/AT/55 version uses 10/100Mbps Ethernet connections throughout. It does not provide Gigabit Ethernet or SFP fibre uplinks. For installations requiring higher network throughput, choose a switch with the appropriate Gigabit connectivity instead.
Downloads & Documentation
Specifications
Model and Connectivity
- Brand: Tiandy
- Model: TC-P3S06 Spec:F/0420/AT/55
- Device type: Fast Ethernet PoE network switch
- Total Ethernet ports: 6 × RJ45
- PoE ports: 4 × 10/100Mbps RJ45 (ports 1–4)
- Uplink ports: 2 × 10/100Mbps RJ45 (ports 5–6)
- Speed negotiation: Automatic 10/100Mbps
- Auto MDI/MDIX: Supported
- Switching method: Store-and-forward
PoE and Power
- PoE standards: IEEE 802.3af and IEEE 802.3at
- Maximum individual PoE+ port rating: 30W
- Total shared PoE budget: 55W maximum
- PoE output voltage: 52V DC
- PoE power pairs: Pins 1/2 positive, pins 3/6 negative
- PoE priority: Port 1 > 2 > 3 > 4
- Input voltage: AC 100–240V
- Internal power supply rating: 52V DC / 1.25A
- Mainboard power consumption: 10W maximum
Switching Performance
- Switching capacity: 1.2Gbps
- Packet forwarding rate: 0.8928Mpps
- Packet buffer: 448K
- MAC address table: 1K entries
- Ethernet standards: IEEE 802.3, IEEE 802.3u and IEEE 802.3x
- Flow control: IEEE 802.3x full-duplex; back pressure half-duplex
Operating Modes
- Mode selection: Three-position physical DIP switch
- Default Mode: All ports communicate at adaptive 10/100Mbps speeds; PoE watchdog disabled
- VLAN Mode: PoE ports 1–4 isolated from each other, with communication to uplink ports 5–6; PoE watchdog enabled
- Extend Mode: PoE ports 1–4 operate at 10Mbps, supporting link extension up to 220m; PoE watchdog enabled
- PoE watchdog: Supported in VLAN and Extend modes
Network Cabling
- 10BASE-T: Cat3, Cat4, Cat5 or higher UTP/STP cable, up to 100m in normal operation
- 100BASE-TX: Cat5 or higher UTP/STP cable, up to 100m in normal operation
- Extended link distance: Up to 220m at 10Mbps in Extend Mode
Protection and Indicators
- Common-mode Ethernet surge protection: 4kV (Level C)
- ESD air discharge protection: 8kV
- ESD contact discharge protection: 6kV
- Referenced EMC standards: EN 61000-4-2 and EN 61000-4-5
- Status indicators: Power, DIP mode, port link/data and maximum PoE power
- PoE status indication: Green link/data and selectable yellow PoE indication
Environmental Specifications
- Operating temperature: -10°C to +50°C
- Storage temperature: -40°C to +70°C
- Operating humidity: 10–90% RH, non-condensing
- Storage humidity: 5–95% RH, non-condensing
Physical Specifications
- Device width: 200mm
- Device depth: 118mm
- Device height: 44mm
- Net weight: 0.54kg
- Packaging dimensions: 245 × 190 × 60mm
- Gross packaged weight: 0.88kg











