Dahua 24-Port Gigabit PoE Cloud Managed Switch – 375W

R7,699.00 Incl. VAT

The Dahua DH-CS4228-24GT-375 (V2) is a 28-port cloud-managed Gigabit network switch with 24 PoE ports, a substantial 375W shared PoE budget and four high-power ports supporting up to 90W each. Designed for larger IP surveillance and business networks, it combines Gigabit connectivity, intelligent PoE management and remote monitoring through Dahua DoLynk Care.

  • 28 network ports: 24 × 10/100/1000 Mbps PoE RJ45 ports, 2 × Gigabit RJ45 uplinks and 2 × Gigabit SFP uplink slots.
  • 375W total PoE budget: Ports 1–4 support up to 90W each; ports 5–24 support up to 30W each, subject to the combined power limit.
  • Cloud and web management: Configure and monitor the network using local web management or Dahua DoLynk Care.
  • PoE Watchdog: Automatically restarts unresponsive PoE connections after two minutes without traffic when operating in unmanaged mode.
  • Extended PoE transmission: Supports distances up to 250m at 10 Mbps in Extend Mode, with actual performance dependent on cabling and connected equipment.
  • Layer 2 networking: Supports VLANs, STP/RSTP, link aggregation, port isolation and traffic management.
  • 56 Gbps switching capacity: Provides Gigabit connectivity for demanding multi-device networks.
  • Desktop or rack installation: Metal enclosure with integrated 100–240V AC power supply and an operating temperature range of -10°C to +55°C.

Important: PoE Watchdog and 250m Extend Mode require Managed Mode to be switched off. SFP transceivers must be selected separately for fibre connections.

Out of stock

SKU: DH-CS4228-24GT-375 Categories: , , Brand:

Description

Dahua DH-CS4228-24GT-375 (V2) – 24-Port Gigabit PoE Cloud Managed Switch

When a surveillance installation grows beyond a handful of IP cameras, the network switch needs to provide more than enough connection points. It must also distribute power reliably, accommodate high-consumption equipment and provide sufficient uplink capacity for the combined network traffic. The Dahua DH-CS4228-24GT-375 (V2) addresses these requirements with 24 Gigabit PoE ports, four additional Gigabit uplink interfaces and a shared 375W PoE power budget.

The switch provides 24 powered RJ45 connections, two dedicated Gigabit RJ45 uplinks and two Gigabit SFP slots for optical fibre connectivity. This arrangement allows cameras and other network devices to connect through the powered ports while separate uplinks connect the switch to recording equipment, routers or other network switches. Its 56 Gbps switching capacity and 41.664 Mpps forwarding rate support high-volume network traffic without restricting the individual PoE ports to Fast Ethernet speeds.


Power Distribution for Standard and High-Power Devices

The 375W PoE budget is particularly useful for installations combining conventional IP cameras with more demanding powered equipment. Ports 1–4 provide up to 90W each, while ports 5–24 provide up to 30W each. The switch supports IEEE 802.3af, IEEE 802.3at, Hi-PoE and IEEE 802.3bt power technologies.

The important consideration is that 375W is the total available PoE budget, not the power available independently on every port. For example, four devices drawing 90W each would consume 360W, leaving only 15W for the remaining PoE connections. An installer should calculate the combined power requirements of all connected devices, including their maximum operating loads, before selecting the switch for a particular installation.

Intelligent PoE management provides power consumption monitoring and individual port power control. The switch can also disable PoE output when an overload is detected, helping protect the power distribution system.


Network Management and Automatic PoE Recovery

The DH-CS4228-24GT-375 V2 supports local browser-based management and cloud management through Dahua DoLynk Care. Network administrators can monitor connected equipment, review faults and configure supported networking functions without treating the switch as a basic unmanaged distribution device.

Its Layer 2 capabilities include IEEE 802.1Q VLANs, STP/RSTP loop protection, static link aggregation, port isolation, port mirroring and network traffic controls. These functions allow installers to organise traffic, manage connections and reduce the risk of network disruption caused by accidental loops or excessive broadcast traffic.

For surveillance applications, the switch also offers a PoE Watchdog function. When enabled in the appropriate operating mode, it monitors the PoE ports and automatically restarts a port after detecting two minutes without network traffic. This can help restore communication with a connected camera without requiring someone to manually disconnect its power.


Extended Transmission and Installation Considerations

The switch provides an Extend Mode supporting PoE transmission distances of up to 250m at a reduced network speed of 10 Mbps. This can be useful where equipment must be positioned beyond conventional Ethernet cable distances, provided the connected device’s bandwidth and power requirements are suitable.

Operating-mode selection matters: Dahua specifies that PoE Watchdog and Extend Mode operate only when Managed Mode is switched off. Normal managed operation is therefore distinct from these hardware-controlled modes. Extended-distance performance also depends on cable quality, conductor resistance, transmission distance and the power requirements of the connected device.

The switch uses a metal enclosure measuring approximately 440 × 228.81 × 43.65mm and is suitable for desktop or rack installation. Its integrated 100–240V AC power supply eliminates the need for a separate external power brick. The specified operating temperature range is -10°C to +55°C, making the unit suitable for appropriately ventilated network and surveillance equipment installations within those environmental limits.

The combination of 24 Gigabit PoE connections, higher-power ports, fibre uplink options and configurable network management makes this V2 switch a practical option for larger CCTV networks where both electrical power capacity and network administration are important.


What’s in the Box

  • 1 × Dahua DH-CS4228-24GT-375 (V2) PoE network switch
  • 1 × AC power cord
  • 1 × Rack-mounting kit
  • 1 × User manual
  • 1 × Legal and regulatory information document

Downloads & Documentation

Specifications

Product Identification

  • Brand: Dahua
  • Model: DH-CS4228-24GT-375 (V2)
  • Product Type: Cloud-managed Gigabit PoE network switch
  • Network Layer: Layer 2
  • Total Network Interfaces: 28

Network Ports and Performance

  • PoE Ports: 24 × RJ45 10/100/1000 Mbps
  • Copper Uplink Ports: 2 × RJ45 10/100/1000 Mbps (ports 25–26)
  • Optical Uplink Ports: 2 × Gigabit SFP slots (ports 27–28)
  • Switching Capacity: 56 Gbps
  • Packet Forwarding Rate: 41.664 Mpps
  • Packet Buffer: 4 Mbit
  • MAC Address Table: 8K entries
  • Jumbo Frame: 15,360 bytes
  • VLAN Capacity: 32 VLANs
  • Ethernet Standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3z, 802.3az and 802.3ad

Power over Ethernet

  • PoE Standards: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt and Hi-PoE
  • Total PoE Power Budget: 375W
  • High-Power Ports: Ports 1–4, up to 90W per port
  • Standard PoE Ports: Ports 5–24, up to 30W per port
  • Power Management: PoE consumption monitoring and individual port power on/off control
  • Overload Protection: PoE output shutdown when an overload is detected
  • PoE Watchdog: Monitors ports 1–24 and restarts a port after two minutes without traffic when Managed Mode is disabled
  • Extended PoE Distance: Up to 250m at 10 Mbps in Extend Mode, subject to cabling and connected-device power requirements
  • Extend Mode Restriction: Available only when Managed Mode is disabled

Network Management and Security

  • Management Interfaces: Local web management and cloud management
  • Cloud Platform: Dahua DoLynk Care
  • Management Selection: Hardware DIP switch
  • VLAN: IEEE 802.1Q
  • Spanning Tree: STP and RSTP
  • Link Aggregation: Static aggregation
  • Port Security: Port isolation and MAC/port binding
  • Loop Protection: Supported
  • Port Mirroring: Local and N:1 mirroring
  • Traffic Controls: Unknown unicast suppression, multicast storm control and broadcast storm control
  • Discovery Protocol: LLDP
  • IP Configuration: DHCP client
  • Monitoring: Logs and fault alarms
  • Flow Control: IEEE 802.3x

Electrical Specifications

  • Power Supply: Integrated AC power supply
  • Input Voltage: 100–240V AC
  • Input Frequency: 47–63Hz
  • Maximum Input Current: 7A
  • Idle Power Consumption: 13.3W
  • Full-Load Power Consumption: 391.7W
  • Reset Button: 1

Physical and Environmental Specifications

  • Enclosure Material: Sheet metal
  • Installation: Desktop or rack mounting
  • Net Dimensions (L × W × H): 440 × 228.81 × 43.65mm
  • Net Weight: 2.7kg
  • Operating Temperature: -10°C to +55°C
  • Operating Humidity: 10%–90% RH, non-condensing
  • Storage Temperature: -40°C to +75°C
  • Storage Humidity: 5%–95% RH, non-condensing
  • Electrostatic Protection: 8kV air discharge; 6kV contact discharge
  • Lightning Protection: 6kV common mode; 1kV differential mode
  • Manufacturer-Listed Certification: CE

Manufacturer-Listed Package Contents

  • 1 × Network switch
  • 1 × AC power cord
  • 1 × Rack-mounting kit
  • 1 × User manual
  • 1 × Legal and regulatory information document