Dahua 32-Channel WizSense AI Network Video Recorder – 4 HDD Bays
R11,499.00 Incl. VAT
The Dahua DHI-NVR5432-EI is a 32-channel WizSense AI Network Video Recorder designed for larger IP surveillance systems requiring extensive storage, intelligent video analysis and high-resolution monitoring. It combines four SATA hard drive bays, high network bandwidth and built-in AI processing in a 1.5U recorder.
- 32 IP camera channels: Supports network cameras with resolutions up to 32MP.
- Four HDD bays: 4 SATA interfaces supporting up to 20TB per drive, subject to operating conditions.
- High recording bandwidth: Up to 384Mbps incoming, recording and outgoing with recorder AI disabled; 200Mbps with AI enabled.
- Powerful decoding: Up to 32 simultaneous 1080p streams at 30fps with recorder AI disabled.
- Built-in WizSense AI: 2-channel face detection and recognition, 4-channel perimeter protection and 8-channel SMD Plus.
- AcuPick intelligent search: Supports up to 32 channels with compatible camera-side AI.
- Flexible display connections: Dual HDMI and dual VGA outputs, with HDMI resolution support up to 8K.
- Network connectivity: Two Gigabit Ethernet ports, ONVIF interoperability, iSCSI and network redundancy features.
- Advanced connectivity: 16 alarm inputs, 6 alarm outputs, eSATA and three USB ports.
- Camera power: No built-in PoE camera ports; cameras require separate network power arrangements. Surveillance hard drives are required for recording.
Description
Dahua DHI-NVR5432-EI 32-Channel WizSense AI Network Video Recorder
For surveillance installations with dozens of IP cameras, recording capacity alone is not enough. The system must also handle substantial network traffic, provide practical access to recorded footage and help operators find important events without searching through hours of video. The Dahua DHI-NVR5432-EI addresses these requirements with 32 IP camera channels, four hard drive bays, high-bandwidth recording and Dahua’s WizSense intelligent video technology.
This 1.5U network video recorder is particularly suited to larger commercial, industrial and multi-camera surveillance installations where flexible storage, sophisticated event management and integration with existing network infrastructure are important.
Four Hard Drive Bays for Extended Recording Capacity
The DHI-NVR5432-EI accommodates four SATA surveillance hard drives, with each interface supporting drives up to 20TB under the manufacturer’s specified operating conditions. This provides considerable flexibility when planning storage for a system with up to 32 cameras.
Multiple drive bays allow an installer to allocate more storage to longer retention periods or higher-resolution recording. The actual number of recording days depends on camera resolution, frame rate, compression, recording schedules, scene activity and installed drive capacity.
An additional eSATA interface and iSCSI support provide further storage integration options. The recorder also supports disk grouping and N+M clustering for more advanced system designs.
Smart H.265+ and Smart H.264+ compression help manage video storage and transmission requirements, particularly where multiple cameras are recording continuously.
Recording Bandwidth and High-Resolution Display
With recorder AI disabled, the DHI-NVR5432-EI provides up to 384Mbps incoming, 384Mbps recording and 384Mbps outgoing bandwidth. When recorder AI processing is enabled, the specified bandwidth is 200Mbps in each direction. This distinction is important when calculating the combined bitrates of connected cameras.
The recorder accepts IP camera resolutions up to 32MP, while its simultaneous decoding capacity depends on the selected camera resolution and whether AI processing is active.
For example, with recorder AI disabled, it can decode up to 32 channels of 1080p video at 30fps or 16 channels of 4MP video at 30fps. With AI enabled, these limits become 24 channels of 1080p at 30fps or 12 channels of 4MP at 30fps. Higher-resolution streams use more decoding resources.
Two HDMI outputs and two VGA outputs offer flexible local monitoring arrangements, including HDMI resolutions up to 7680 × 4320. The two HDMI outputs can display different video sources, allowing operators to organise viewing across multiple monitors.
Intelligent Detection and Faster Event Searches
A major advantage of the DHI-NVR5432-EI is its ability to perform selected artificial intelligence functions directly on the recorder, while also supporting additional analytics generated by compatible intelligent IP cameras.
Recorder-based AI processing includes:
- Face detection and recognition: Supports two channels of recorder-side face detection and recognition, with up to 20 face databases containing 20,000 face images.
- Perimeter protection: Supports four channels, with up to ten intelligent video surveillance rules per channel, for identifying relevant activity in defined areas.
- SMD Plus: Supports eight channels of intelligent motion detection with secondary filtering for people and motor vehicles, helping reduce irrelevant motion alerts.
The recorder also supports camera-generated AI events, including ANPR, video metadata, people counting, heat maps and additional perimeter detection functions when those capabilities are provided by the connected cameras.
AcuPick intelligent search can operate across up to 32 channels with supported camera-side intelligence, helping operators locate relevant people or vehicles more efficiently within recorded footage.
These different processing methods matter when specifying a system: the recorder’s built-in AI channel limits do not automatically increase to 32 channels simply because 32 cameras are connected. Camera-dependent functions require suitably equipped IP cameras and supported configurations.
Network Integration, Alarms and Camera Power
Two independent Gigabit Ethernet interfaces support network configurations including multi-address operation, load balancing, fault tolerance and link aggregation. ONVIF interoperability and support for a range of third-party camera manufacturers make the recorder suitable for appropriately configured mixed-brand IP surveillance systems.
The DHI-NVR5432-EI also provides 16 alarm inputs and six alarm outputs, allowing compatible external alarm equipment and configured event responses to be integrated into the surveillance installation. RS-232 and RS-485 connections provide additional system integration options.
This is the non-PoE version of the recorder. Its Ethernet connections are network interfaces, not built-in PoE camera ports. Connected PoE cameras therefore require suitable external PoE switches or injectors, while other cameras require their specified power supplies.
The recorder operates from a 100–240V AC mains supply. It can be installed on a desktop or in a suitable equipment rack, making it a practical choice where cameras, networking, storage and alarm equipment form part of a professionally designed surveillance system.
Additional information
| Built In Poe Ports | None |
|---|---|
| Dvr Nvr Channels | 32 Channel |
Downloads & Documentation
Specifications
System Information
- Brand: Dahua
- Model: DHI-NVR5432-EI
- Product Type: WizSense AI Network Video Recorder
- IP Camera Channels: 32
- Chassis: 1.5U, 4-HDD design
- Processor: Industrial-grade processor
- Operating System: Embedded Linux
- Operating Interface: Local GUI and web interface
Video Recording and Decoding
- Maximum Camera Resolution: 32MP
- Supported Resolutions: 32MP, 24MP, 16MP, 12MP, 8MP, 6MP, 5MP, 4MP, 3MP, 1080p, 720p, 960p, D1, CIF and QCIF
- Bandwidth, AI Disabled: 384Mbps incoming / 384Mbps recording / 384Mbps outgoing
- Bandwidth, AI Enabled: 200Mbps incoming / 200Mbps recording / 200Mbps outgoing
- Decoding, AI Disabled: Up to 32 × 1080p@30fps, 16 × 4MP@30fps, 8 × 8MP@30fps or 2 × 32MP@25fps
- Decoding, AI Enabled: Up to 24 × 1080p@30fps, 12 × 4MP@30fps, 6 × 8MP@30fps or 1 × 32MP@25fps
- Video Compression: Smart H.265+, H.265, Smart H.264+, H.264, MJPEG
- Audio Compression: G.711a, G.711u, PCM, G.726
- Simultaneous Playback: Up to 16 channels
- Recording Modes: General, motion detection, intelligent, alarm and POS
- Backup: USB device and network
WizSense Artificial Intelligence
- Recorder AI Functions: Face detection, face recognition, perimeter protection and SMD Plus
- Face Detection by Recorder: 2 channels, up to 12 face images per second per channel
- Face Recognition by Recorder: 2-channel recorder-side face detection and recognition; supports camera-generated face detection for additional recognition workflows
- Face Database Capacity: Up to 20 face databases containing 20,000 images
- Perimeter Protection by Recorder: 4 channels, up to 10 IVS rules per channel
- SMD Plus by Recorder: 8 channels, with human and motor vehicle filtering
- AcuPick: Up to 32 channels with compatible camera-side AI; up to 1 combined event per channel per second
- Supported Camera AI: Face detection, face recognition, perimeter protection, SMD, ANPR, video metadata, people counting, heat maps, stereo analysis, crowd distribution, vehicle density, PPE detection, smart object detection and smart sound detection
- Video Metadata by Camera: Up to 8 channels
- ANPR by Camera: Supports compatible camera-generated number plate recognition and plate comparison
- Plate Database: Up to 20,000 plate numbers with allowlist and blocklist functions
Display and Video Outputs
- HDMI Outputs: 2
- Maximum HDMI Resolution: 7680 × 4320 (8K)
- VGA Outputs: 2
- Maximum VGA Resolution: 1920 × 1080
- Display Layouts, Main Screen: 1, 4, 8, 9, 16, 25 or 36 divisions
- Display Layouts, Secondary Screen: 1, 4, 8, 9 or 16 divisions
- Multi-Monitor Operation: Different video sources supported on HDMI 1 and HDMI 2
Storage and Network
- Internal HDD Interfaces: 4 SATA ports
- Maximum HDD Capacity: Up to 20TB per SATA port, dependent on operating temperature
- External Storage Interface: 1 × eSATA
- Storage Functions: Disk grouping and iSCSI
- Cluster Support: N+M
- Ethernet Ports: 2 × RJ45 10/100/1000Mbps
- Built-in PoE Ports: None
- Network Modes: Multi-address, load balancing, fault tolerance and link aggregation
- Interoperability: ONVIF Profiles S, T, G and M; CGI and SDK
- Third-Party Camera Access: Supports ONVIF and listed manufacturer protocols, subject to device compatibility
- Mobile Access: iOS and Android
- Supported Network Services: TCP/IP, IPv4/IPv6, HTTP, HTTPS, RTSP, NTP, DHCP, DNS, SMTP, SNMP, FTP, DDNS, P2P and other supported services
Physical Interfaces and Alarms
- Alarm Inputs: 16 channels
- Alarm Outputs: 6 channels, including one 12V 1A output
- Audio Input: 1 × RCA
- Audio Outputs: 2 × RCA
- USB: 1 × USB 2.0 front, 2 × USB 3.0 rear
- Serial Interfaces: 1 × RS-232 and 1 × RS-485
- Alarm Functions: Motion detection, camera offline, storage anomalies, network anomalies and supported intelligent events
- Alarm Actions: Recording, snapshot, alarm output, audio, buzzer, logs, presets and email notifications
Electrical and Physical Specifications
- Power Supply: 100–240V AC, 50/60Hz
- Recorder Power Consumption: ≤13W without hard drives
- Dimensions (L × W × H): 415.1 × 440 × 70mm (depth × width × height)
- Net Weight: 4.74kg
- Operating Temperature: -10°C to +55°C
- Storage Temperature: -20°C to +60°C
- Operating Humidity: 10–93% RH, non-condensing
- Installation: Rack or desktop















