Dahua Wireless Alarm Relay – 5A Low-Voltage Control
R519.00 Incl. VAT
The Dahua DHI-ARM7011-W2(868) is a compact wireless relay for integrating low-voltage equipment with a compatible Dahua AirShield alarm system. It provides a remotely controlled dry-contact output, allowing connected equipment to respond to alarm events, arming status or configured schedules through the Dahua DMSS app.
- Relay output: 1 × NO/NC dry-contact output, rated 0–36 V DC, maximum 5 A.
- External tamper input: 1 × NO/NC input for monitoring a connected device.
- Power requirement: 7–24 V DC external power supply.
- Wireless communication: 868.0–868.6 MHz, two-way communication with frequency hopping and AES-128 encryption.
- Wireless range: Up to 1,200 m in unobstructed open-area conditions.
- Automation: Supports pulse or steady-state output, with alarm-linked and scheduled operation.
- Protection: Overvoltage and overheating protection, voltage monitoring and wireless jamming detection.
- Installation: Compact 39 × 33 × 19 mm housing for indoor installations.
Important: Requires a compatible Dahua wireless alarm hub and suitable external DC power. This is a low-voltage relay, not a direct 230 V mains switching device.
Description
Dahua DHI-ARM7011-W2(868) Wireless Relay
The Dahua DHI-ARM7011-W2(868) brings low-voltage switching into a Dahua AirShield wireless alarm installation. Instead of operating as a standalone smart switch, this compact module connects to a compatible Dahua alarm hub and allows an external electrical circuit to be controlled through alarm events, system status or scheduled automation.
Its single normally open/normally closed (NO/NC) dry-contact relay output is rated for circuits up to 36 V DC and a maximum switching current of 5 A. The output contacts are electrically isolated from the relay’s own power supply circuit, allowing the module to control a separate compatible low-voltage circuit. A dedicated NO/NC external tamper input also allows a connected device’s tamper contact to be monitored by the alarm system.
Flexible operation through Dahua DMSS
Once paired with a compatible Dahua wireless alarm hub, the ARM7011-W2(868) can be configured through the DMSS app. The output supports steady-state operation or a timed pulse, making it possible to adapt switching behaviour to the connected equipment.
Automation scenarios can be linked to system arming and disarming, alarm events or scheduled times. This allows the relay to provide a physical switching action in response to configured alarm-system activity without requiring a separate control cable running back to the hub.
Wireless communication and monitoring
Operating on the 868.0–868.6 MHz frequency band, the relay uses two-way wireless communication, frequency hopping and AES-128 encryption. Dahua specifies communication distances of up to 1,200 m in unobstructed open areas. Actual installation range depends on building construction, positioning and interference.
The module supports wireless jamming detection, input-voltage monitoring, overvoltage protection and overheating protection. A status indicator assists with pairing and communication checks, while supported cloud firmware updates help maintain the device within its Dahua alarm system.
Power and installation requirements
The relay requires an external 7–24 V DC power supply. Its small 39 × 33 × 19 mm housing is suitable for protected indoor installation, including appropriate equipment enclosures or deep junction boxes.
During installation, pair the relay with the Dahua alarm hub through DMSS and check wireless signal strength at the proposed mounting position. Dahua recommends a signal strength of at least two bars before securing the unit.
The ARM7011-W2(868) is intended for low-voltage control and must not be used to switch 230 V mains loads directly. The connected circuit must remain within the relay’s specified voltage and current limits. A compatible Dahua alarm hub and suitable DC power supply are required for operation.
What’s in the Box
- 1 × Dahua DHI-ARM7011-W2(868) Wireless Relay
- 1 × Double-sided mounting tape
- 1 × QR code label
- 1 × Quick Start Guide
- 1 × Legal and regulatory information document
Note: External DC power supply and Dahua alarm hub are not included.
Downloads & Documentation
Specifications
Product Information
- Brand: Dahua
- Model: DHI-ARM7011-W2(868)
- Product Type: Wireless low-voltage relay
- System: Dahua AirShield wireless alarm system
Relay and Control
- Relay Outputs: 1
- Relay Contact Type: Normally Open / Normally Closed (NO/NC)
- Relay Output Rating: 0–36 V DC, maximum 5 A
- Alarm Inputs: 1 × external tamper input (NO/NC)
- Output Modes: Steady State / Pulse
- Pulse Duration: Configurable
- Automation: Arming/disarming, alarm-linked and scheduled scenarios
- Indicator: 1 × LED status indicator
- Control Button: 1
- Test Mode: Supported
- Remote Firmware Update: Cloud update supported
Wireless Communication
- Frequency: 868.0–868.6 MHz
- Communication: Two-way wireless
- Maximum Range: Up to 1,200 m in unobstructed open areas
- Maximum Transmit Power: 25 mW
- Encryption: AES-128
- Frequency Hopping: Supported
- Jamming Detection: Supported
- Signal Strength Detection: Supported
Power and Protection
- Power Supply: 7–24 V DC
- External DC Power Required: Yes
- Overvoltage Protection: Supported
- Overheating Protection: Supported
- Input Voltage Monitoring: Supported
Environmental and Physical
- Installation: Indoor
- Mounting: Wall mount / suitable enclosure
- Operating Temperature: -10°C to +55°C
- Operating Humidity: 10%–90% RH
- Storage Temperature: -10°C to +55°C
- Storage Humidity: 10%–90% RH
- Dimensions: 39 × 33 × 19 mm
- Net Weight: 45 g
- Housing Material: PC + ABS
- Certification: CE











