Dahua Wireless Single-Input Expander
R399.00 Incl. VAT
The Dahua DHI-ARM310-W2(868) is a wireless input expander that connects a wired alarm detector or dry-contact device to a compatible Dahua 868 MHz wireless alarm system. It converts a single wired alarm input into a wireless signal, making it useful for integrating existing wired contacts or suitable third-party detectors without running a signal cable back to the alarm hub.
- Single wired input: 1-channel dry-contact input supporting Normally Open (NO), Normally Closed (NC) and pulse configurations.
- Wireless communication: 868.0–868.6 MHz, with a manufacturer-rated range of up to 1,200 m in unobstructed open space.
- Reliable signalling: Two-way communication, frequency hopping and AES128 encryption.
- Alarm configuration: Supports intrusion, medical, fire, emergency, gas and tamper alarm types.
- Monitoring: Tamper detection, low-battery alerts, wireless signal-strength monitoring and temperature measurement.
- Battery powered: Uses a CR123A battery, with a published battery life of up to 4 years for NO inputs or 2 years for NC/pulse inputs.
- Installation: Compact bracket-mounted design for indoor use, configured through the Dahua DMSS system.
Important: Requires a compatible Dahua 868 MHz wireless alarm hub and a suitable external wired dry-contact device. The expander provides one input zone, not multiple independently monitored wired zones.
Description
Dahua DHI-ARM310-W2(868) Wireless Input Expander
Already have a wired alarm contact that you want to incorporate into a Dahua wireless alarm system? The Dahua DHI-ARM310-W2(868) provides a practical way to connect a single wired detector to a compatible Dahua 868 MHz alarm hub without having to run its alarm signal wiring all the way back to the control panel.
This compact module acts as a bridge between a conventional wired dry-contact device and the wireless alarm network. When the connected detector changes state, the expander communicates the event wirelessly to the alarm hub. It is particularly useful when retaining an existing door contact, integrating a suitable wired detector or adding a specialised alarm input to a wireless installation.
One wired detector input: The ARM310-W2(868) provides one dry-contact input, configurable for Normally Open (NO), Normally Closed (NC) or pulse operation. This allows an installer to match the input configuration to the connected device. It supports six selectable alarm classifications: intrusion, medical, fire, emergency, gas and tamper. These are alarm event types, not six separate input zones.
Wireless communication: Operating between 868.0 MHz and 868.6 MHz, the module uses two-way radio communication with frequency hopping and AES128 encryption. Dahua specifies a maximum communication distance of 1,200 m in unobstructed open space. Actual installation range depends on walls, building materials, interference and the position of the alarm hub.
Battery operation and monitoring: The expander uses a CR123A battery, eliminating the need for a separate power connection to the module. Dahua’s product datasheet specifies up to 4 years of battery life with an NO input, or up to 2 years with an NC or pulse input. Actual service life depends on operating conditions and configuration. Low-battery monitoring, tamper detection and temperature monitoring provide additional device-status information through the alarm system.
Configuration and installation: The module is paired with a compatible Dahua wireless alarm hub and configured through the Dahua DMSS system. Installers can assign its alarm type, select the external input configuration and test wireless signal strength before securing the unit in position. Its compact 100.2 × 20.8 × 20.3 mm housing is intended for indoor bracket mounting.
The ARM310-W2(868) is a single-input signalling module rather than a complete alarm controller or a power supply for external detectors. A compatible Dahua wireless alarm hub and a suitable wired dry-contact device are required. Any external detector requiring electrical power must have an appropriate independent supply.
What’s in the Box
- 1 × Dahua DHI-ARM310-W2(868) Wireless Input Expander
- 1 × Patch cord for wired detector connection
- 1 × Double-sided mounting tape
- 1 × Screw kit
- 1 × Quick Start Guide
- 1 × Legal and regulatory information document
Downloads & Documentation
Specifications
Product Information
- Brand: Dahua
- Model: DHI-ARM310-W2(868)
- Product Type: Wireless Input Expander
- System: Dahua 868 MHz Wireless Alarm System
- Function: Converts a wired dry-contact detector input into a wireless alarm signal
Wired Input and Alarm Functions
- Protection Zones: 1-channel dry-contact input
- Input Configuration: Normally Open (NO), Normally Closed (NC) or Pulse
- Default Input: Normally Open (NO)
- Supported Alarm Types: Intrusion, Medical, Fire, Emergency, Gas and Tamper
- Tamper Detection: Supported
- Low-Battery Detection: Supported
- Test Mode: Supported
- Signal-Strength Detection: Supported
- Remote Firmware Update: Cloud update
- Update Recovery: Automatic recovery from update failure
- Configuration: Dahua DMSS application and compatible alarm hub
Wireless Communication
- Wireless Frequency: 868.0–868.6 MHz
- Communication Distance: Up to 1,200 m in unobstructed open space
- Communication Method: Two-way wireless communication
- Frequency Hopping: Supported
- Encryption: AES128
- Transmit Power: Maximum 25 mW
Power and Battery
- Power Supply: CR123A battery
- Battery Life (NO Input): Up to 4 years, according to the product datasheet
- Battery Life (NC/Pulse Input): Up to 2 years, according to the product datasheet
- Maximum Power Consumption: 125 mW
Temperature Monitoring
- Measurement Range: -15°C to +65°C
- Measurement Accuracy: ±1°C
- Measurement Resolution: 1°C
Physical and Environmental Specifications
- Dimensions: 100.2 × 20.8 × 20.3 mm
- Net Weight: 70 g
- Installation: Bracket mounting
- Installation Environment: Indoor
- Operating Temperature: -10°C to +55°C
- Operating Humidity: 10%–90% RH
- Casing Material: PC + ABS
- Indicator: 1 × Green alarm LED
- Control: 1 × Power switch/button
- Certification: CE










