Dahua NVR/XVR Alarm Box – 16 Inputs / 6 Outputs
R439.00 Incl. VAT
The Dahua DHI-ARB1606 is a compact RS485 alarm input/output expansion box for compatible Dahua XVR and NVR recorders. It provides 16 wired alarm inputs and 6 alarm outputs, allowing supported CCTV recording systems to incorporate external alarm signals and configure linked alarm responses.
- 16 alarm inputs supporting normally open (NO) and normally closed (NC) configurations.
- 6 alarm outputs for external alarm control and signalling.
- RS485 communication with compatible Dahua XVR/NVR equipment.
- 2-bit DIP switch for addressing up to 4 alarm boxes on a supported recorder.
- 12V DC / 1A power input with low 0.2W rated power consumption.
- PWR and ACT indicators for power and communication status.
- Compact desktop design measuring 97.68 × 90.3 × 33mm.
Compatibility: Requires a Dahua recorder that specifically supports ARB1606 alarm-box expansion via RS485. An RS485 port alone does not guarantee compatibility.
Out of stock
Description
Dahua DHI-ARB1606 RS485 Alarm Box
The Dahua DHI-ARB1606 allows a compatible CCTV recorder to work with more external alarm connections than its built-in alarm terminals may provide. Rather than installing a separate alarm controller, this compact expansion box connects through RS485 and makes additional alarm inputs and outputs available to a supported Dahua XVR or NVR.
With 16 alarm inputs and 6 alarm outputs, the ARB1606 is useful for surveillance installations that need to incorporate wired security detectors, alarm contacts or external signalling equipment into the recorder’s alarm functions.
Connect External Alarm Devices to Your CCTV Recorder
The 16 alarm inputs support normally open (NO) and normally closed (NC) configurations. This allows installers to connect suitable external alarm contacts and configure how the recorder responds when an input changes state.
The six outputs provide several control options. These include four normally open switching outputs, one normally open/normally closed changeover output, and a controlled 12V output rated at 500mA. The appropriate output must be selected according to the requirements of the connected equipment.
Once communication has been established, linked alarm actions can be configured through the supported recorder’s alarm settings. The ARB1606 acts as an expansion interface rather than a standalone alarm monitoring system.
RS485 Expansion with Addressable Alarm Boxes
The ARB1606 communicates through a single RS485 interface. A 2-bit DIP switch assigns the alarm box its address, allowing multiple units to operate on a supported system without address conflicts.
Dahua specifies support for up to four addressable alarm boxes when the connected recorder supports this configuration. This makes it possible to increase the number of alarm connections in larger installations without replacing the recorder solely to obtain additional alarm terminals.
The front panel includes two status indicators:
- PWR: Illuminates when the alarm box is powered.
- ACT: Flashes approximately once per second when communication with the recorder is operating correctly.
These indicators assist installers when checking power and RS485 communication during setup or troubleshooting.
Low-Power Operation and Installation
The DHI-ARB1606 operates from a 12V DC / 1A supply and has a manufacturer-rated power consumption of just 0.2W. It can be powered using a suitable separate 12V adaptor or, where the recorder’s power arrangement permits, through a 1-to-2 power splitter connected to the DVR power supply.
The enclosure measures 97.68 × 90.3 × 33mm and is designed for desktop installation. Its operating temperature range of -10°C to +55°C makes it suitable for appropriately protected equipment locations within those conditions.
Important installation requirement: Check that the intended Dahua XVR or NVR supports the ARB1606 external alarm-box function. Recorder support, RS485 wiring, device addressing and alarm configuration are necessary for correct operation.
What’s in the Box
- 1 × Dahua DHI-ARB1606 Alarm Box
- 1 × 1-to-2 DC power splitter cable (documented in Dahua’s alarm-box user manual)
Downloads & Documentation
Specifications
- Brand: Dahua
- Model: DHI-ARB1606
- Product Type: RS485 Alarm Input/Output Expansion Box
- Communication Interface: 1 × RS485 port
- Alarm Inputs: 16 channels
- Alarm Input Configuration: Normally Open (NO) / Normally Closed (NC)
- Alarm Outputs: 6 channels
- Output Configuration: 4 × NO switching outputs, 1 × NO/NC changeover output, 1 × controlled 12V output
- Controlled 12V Output Rating: 500mA maximum
- DIP Switch: 2-bit addressing switch
- Supported Alarm Box Addresses: 4 (addresses 0–3)
- Maximum Alarm Boxes: Up to 4 per supported recorder
- Recorder Connection: RS485 A/B terminals
- Recorder Compatibility: Dahua XVR/NVR models supporting ARB1606 external alarm expansion
- Power Supply: 12V DC / 1A
- Alternative Power Connection: Compatible DVR power supply through a 1-to-2 power splitter
- Rated Power Consumption: 0.2W
- Power Indicator: PWR LED
- Communication Indicator: ACT LED
- Operating Temperature: -10°C to +55°C
- Operating Humidity: 10%–90% RH
- Dimensions: 97.68 × 90.3 × 33mm (manufacturer order)
- Net Weight: ≤ 200g
- Installation: Desktop














