Dahua 5GHz AC867 Outdoor Wireless Bridge – 3km
R2,199.00 Incl. VAT
The Dahua DH-PFWB5-30ac is a 5GHz outdoor wireless bridge designed to carry network data between buildings, remote IP cameras and other network locations without running a physical Ethernet cable across the entire distance. Supporting 802.11ac wireless transmission at up to 867Mbps and point-to-point distances of up to 3km, it provides a practical solution for long-range network and CCTV connectivity.
- 5GHz 802.11a/n/ac: Wireless link rates up to 867Mbps using an 80MHz channel.
- Up to 3km transmission: Directional wireless connectivity for suitably aligned outdoor installations with a clear signal path.
- Gigabit Ethernet: One 10/100/1000Mbps RJ45 network port.
- 2×2 MU-MIMO: Supports efficient wireless communication and TDMA-based transmission modes.
- Flexible configuration: Supports access point, station and wireless bridge operating modes.
- Outdoor protection: IP65-rated enclosure with an operating temperature range of -30°C to +70°C.
- 24V passive PoE: Powered through its network connection, with a 24V PoE power adapter listed in the manufacturer’s package contents.
- Installation: Pole/bracket mounting, web-based management and four RSSI indicators for signal alignment.
Important: A point-to-point connection requires a compatible wireless bridge at the remote end. The 867Mbps figure is the maximum wireless link rate, not guaranteed usable network throughput. The Ethernet port accepts 24V passive PoE and does not provide PoE output to connected devices.
Description
Dahua DH-PFWB5-30ac 5GHz Outdoor Wireless Bridge
Connecting a camera installation, remote building or network point several hundred metres away can be difficult when laying Ethernet cable is impractical. The Dahua DH-PFWB5-30ac provides a wireless alternative, using a directional 5GHz radio link to transmit network data between suitably positioned locations.
Part of Dahua’s V-Radio wireless transmission range, this outdoor CPE supports point-to-point and point-to-multipoint networking configurations. Its 802.11ac radio offers a maximum negotiated wireless rate of 867Mbps using an 80MHz channel, while a Gigabit Ethernet connection provides the wired interface to the local network equipment.
Dahua specifies a point-to-point transmission distance of up to 3km. This makes the bridge particularly relevant to CCTV systems spread across separate buildings, agricultural properties, business premises and other locations where a conventional network cable cannot conveniently reach. The achievable distance and data throughput depend on antenna alignment, clear line of sight, interference, installation conditions and radio configuration.
Directional Wireless Connectivity for CCTV and Networks
The DH-PFWB5-30ac uses a directional antenna system with a specified 35° horizontal and 35° vertical transmission angle. Rather than distributing Wi-Fi broadly around a building, the radio is intended to establish a focused connection towards another wireless network point.
Its 2×2 MU-MIMO wireless architecture and supported TDMA operating modes help manage wireless communication in suitable network deployments. TDMA technology allocates transmission opportunities between communicating devices, making it useful for installations carrying continuous network traffic such as IP camera video streams.
The bridge supports access point and station configurations, including WDS and TDMA-based modes. This allows installers to configure the device according to the intended wireless link topology. A corresponding compatible bridge or base station must be installed and configured at the other end of a point-to-point connection.
Network configuration is handled through a web-based management interface. The unit also supports WPA/WPA2 security options, access control lists, DHCP and web-based firmware updates. Four RSSI signal indicators provide a practical reference when positioning and aligning the radio towards its remote connection.
Outdoor Installation and Power Requirements
The DH-PFWB5-30ac is designed for exposed outdoor installations, with an IP65-rated enclosure providing protection against dust ingress and water jets. Its specified operating temperature range of -30°C to +70°C accommodates a wide variety of environmental conditions.
The unit measures just 130 × 97 × 37mm and weighs approximately 200g, allowing it to be installed using a suitable mounting bracket or pole arrangement without requiring a large equipment enclosure.
A single Gigabit RJ45 port carries the Ethernet connection and accepts 24V/0.5A passive PoE input. The manufacturer lists a compatible 24V PoE adapter in the package contents. The bridge must be powered using the correct passive PoE arrangement rather than assuming compatibility with standard IEEE 802.3af/at PoE equipment.
The device consumes up to 10W under full load and does not supply PoE power onwards to a connected camera or other network device. Any remote equipment must therefore have its own appropriate power supply.
For dependable operation, the two wireless endpoints should be positioned with a clear signal path and carefully aligned. Wireless channel selection, local radio regulations and the surrounding interference environment should be considered during configuration.
What’s in the Box
- 1 × Dahua DH-PFWB5-30ac wireless bridge
- 1 × Pole mounting bracket
- 2 × Dowel pins
- 1 × 24V PoE power adapter
- 1 × Power cord
- 1 × Quick Start Guide
Downloads & Documentation
Specifications
Product Identification
- Brand: Dahua
- Model: DH-PFWB5-30ac
- Product Series: V-Radio
- Device Type: Outdoor wireless bridge / CPE
- Application: Point-to-point and point-to-multipoint wireless network transmission
Wireless Specifications
- Wireless Standard: IEEE 802.11a/n/ac
- Frequency Band: 5GHz
- Operating Frequency: 5.150–5.850GHz, subject to regional restrictions
- Maximum Wireless Link Rate: Up to 866Mbps at 80MHz channel width (AC867 class)
- Maximum Link Rate at 40MHz: 400Mbps
- Channel Width: 5/10/20/40/80MHz
- Maximum Stated Transmission Distance: 3,000m under suitable installation conditions
- Antenna Type: Integrated directional antenna
- Antenna Direction Angle: Horizontal 35°; vertical 35°
- MU-MIMO: 2×2
- OFDMA: Supported
- DFS: Supported
- Transmit Power: Frequency-band and regulatory-region dependent
Network Connectivity
- Ethernet Interface: 1 × RJ45 10/100/1000Base-T
- Operating Modes: Access point, WDS, TDMA-based wireless access point/station and ARPNAT station modes
- Wireless Security: WPA/WPA2-Personal and WPA/WPA2-Enterprise
- Additional Security: Access control lists and user isolation
- DHCP: Supported
- Management Interface: Web-based configuration
- Firmware Upgrade: Web-based update
- Network Services: DHCP server, SNMP server, NTP client, router advertisement daemon and ping watchdog
Hardware and Power
- System Memory: 64MB DDR
- Power Input: 24V DC, 0.5A passive PoE
- Power Adapter AC Input: 100–240V AC
- Maximum Power Consumption: 10W
- PoE Output: Not supported
- Indicator Lights: 1 × Power, 1 × LAN, 4 × RSSI
Environmental and Physical Specifications
- Ingress Protection: IP65
- Operating Temperature: -30°C to +70°C
- Storage Temperature: -40°C to +85°C
- Operating Humidity: 0–90% RH, non-condensing
- Net Dimensions (L × W × H): 130 × 97 × 37mm
- Net Weight: 200g
- Mounting: Bracket/pole mounting
- Manufacturer-Listed Certifications: CE, FCC
Manufacturer-Listed Package Contents
- 1 × DH-PFWB5-30ac wireless bridge
- 1 × Pole mounting bracket
- 2 × Dowel pins
- 1 × 24V PoE power adapter
- 1 × Power cord
- 1 × Quick Start Guide










