Dahua Integrated IP & Analogue CCTV Camera Tester
R9,330.00 Incl. VAT
The Dahua DH-PFM900-E is a professional handheld CCTV installation tester for commissioning, configuring and troubleshooting IP and analogue surveillance cameras. It combines a 4-inch video display, camera controls, network cable diagnostics, digital multimeter and camera power output in one portable instrument.
- 4-inch TFT display: 800 × 480 resolution with physical control keys and a flip-out QWERTY keyboard.
- IP camera testing: ONVIF camera access, 1MP–12MP support and H.264/H.265 video decoding.
- Multi-format analogue testing: HDCVI, HDTVI, AHD and CVBS, including supported HDCVI resolutions up to 4K.
- Camera setup: Live viewing, snapshots, video recording, digital zoom, camera initialisation and supported configuration adjustments.
- Network diagnostics: IP address scanning, Ping tests, PoE measurements and network cable length and attenuation testing over 1–130 m, subject to cable characteristics.
- Electrical testing: Built-in digital multimeter, RS-485 PTZ control and audio input/output testing.
- Camera power: 12 V DC, 2 A output for temporary camera powering during installation.
- Rechargeable battery: Replaceable 7.4 V lithium-ion battery, up to 22.2 Wh, providing approximately 8 hours of normal operation.
- Portable design: 193 × 115 × 37.1 mm, 540 g net weight, with dual 35-lumen LED lights.
Designed for CCTV installers and maintenance technicians working with supported network and coaxial camera systems. Includes a PoE power injector, testing cables, probes and carrying accessories.
Out of stock
Description
Dahua DH-PFM900-E Integrated CCTV Camera Tester
Commissioning a security camera often requires more than checking whether a picture appears. An installer may need to identify an incorrect IP address, test network cabling, configure a camera, check a power supply or troubleshoot a PTZ connection. The Dahua DH-PFM900-E Integrated Mount Tester brings these tasks together in a portable handheld device that can be used directly at the installation point.
Its 4-inch, 800 × 480 TFT screen provides a local video display for testing cameras without relying on an installed recorder or separate CCTV monitor. The combination of dedicated control buttons and a 45-key flip-out keyboard is particularly useful when entering camera addresses, working through settings or performing configuration tasks in the field.
The tester handles both IP surveillance cameras and traditional coaxial video systems, making it a versatile servicing instrument for installations containing different generations of CCTV equipment.
Check IP and Analogue Cameras from One Device
For network cameras, the DH-PFM900-E supports ONVIF-based access and H.264/H.265 video decoding, with listed IP camera test resolutions ranging from 1MP to 12MP. Technicians can view live video, take snapshots, record footage and use digital zoom while checking camera operation. Supported configuration functions include camera initialisation and adjustments to network addresses, resolution and account settings.
For analogue systems, the tester supports HDCVI, HDTVI, AHD and CVBS, allowing installers to work with both high-definition coaxial cameras and older PAL/NTSC equipment. Its HDCVI testing capabilities extend to supported 4K signals at 12.5 or 15 fps. A direct SD/HD mode switch, on-screen display controls and PTZ functions simplify switching between different camera technologies.
RS-485 control supports more than 30 control protocols, including Pelco-D/P, enabling technicians to investigate compatible PTZ camera movement and control issues.
Diagnose Cabling, Network and Power Problems
A clear video picture is only one part of a reliable installation. The DH-PFM900-E includes network diagnostics that help technicians investigate connection problems before completing a job. IP address scanning and Ping testing assist with network troubleshooting, while network cable length and attenuation measurements cover a stated test range of 1–130 m. The maximum measurable distance depends on the cable material.
The tester can also display measurements relating to connected PoE/PSE equipment. Its integrated digital multimeter measures AC/DC voltage and current, resistance and capacitance, and supports diode and continuity testing. These functions are valuable when investigating wiring faults, power problems and electrical connections.
A 12 V DC, 2 A camera power output allows a suitable camera to be powered temporarily during testing without first completing its permanent power installation. The unit also provides audio testing and RS-485 data monitoring for additional diagnostic work.
Portable Power for Installation Work
The DH-PFM900-E uses a dedicated, replaceable 7.4 V lithium-ion battery rated at up to 22.2 Wh. Dahua specifies approximately eight hours of normal operation, although actual operating time depends on the testing functions and power demands in use.
The supplied PoE power injector provides a charging arrangement, while two integrated 35-lumen LED lights assist when working in poorly illuminated equipment rooms or installation locations.
Measuring 193 × 115 × 37.1 mm and weighing approximately 540 g, the tester is compact enough to carry between camera positions. Its supplied tool bag, cables and testing accessories help keep the equipment together during installation and servicing work.
For IP testing, the camera must support the relevant ONVIF functions. Analogue signal support also depends on the camera’s format, resolution and frame rate. The DH-PFM900-E is an installation and diagnostic instrument rather than a replacement for a permanent CCTV recording system.
What’s in the Box
- 1 × Dahua DH-PFM900-E Integrated Mount Tester
- 1 × Tester lanyard
- 1 × Tool bag
- 1 × Tool bag lanyard
- 1 × PoE power injector
- 1 × Charging cord
- 1 × Network cable
- 1 × Coaxial cable
- 1 × USB cable
- 1 × RS-485 cable
- 1 × RS-485 terminal
- 1 × Power output cord
- 1 × Audio cable
- 1 × Set of multimeter probes
- 1 × User manual
Downloads & Documentation
Specifications
General Specifications
- Brand: Dahua
- Model: DH-PFM900-E
- Product type: Integrated Mount Tester
- Application: IP and analogue CCTV camera installation, configuration and troubleshooting
- Operating system: Linux
- Display: 4.0-inch TFT
- Screen resolution: 800 × 480 pixels
- Controls: 13 main keyboard keys and 45 flip-out keyboard keys, plus power and reset controls
- Supported interface languages: English and multiple additional languages
- Automatic standby/shutdown: Supported
- Firmware updates: Online and local updates
- LED illumination: 2 × 35-lumen lights
IP Camera Testing
- Camera access protocol: ONVIF
- Supported IP camera resolutions: 1MP, 1.3MP, 2MP, 3MP, 4MP, 5MP, 6MP, 8MP and 12MP
- Video decoding: H.264 and H.265
- Video functions: Live viewing, snapshots, recording and digital zoom
- Camera initialisation: Supported
- Camera configuration: Supported resolution, IP address, password and factory-reset functions
Analogue Camera Testing
- Supported video systems: HDCVI, HDTVI, AHD and CVBS
- HDCVI: 2MP at 25/30 fps; 4MP at 25/30 fps; 5MP at 20 fps; 6MP at 20 fps; 4K at 12.5/15 fps
- HDTVI: 2MP at 25/30 fps; 4MP at 25/30 fps; 5MP at 20 fps
- AHD: 2MP at 25/30 fps; 4MP at 25/30 fps
- CVBS: PAL and NTSC
- Display functions: Live viewing, snapshots, recording and digital zoom
- Camera controls: On-screen display menu and supported PTZ control
- Video signal generation: PAL/NTSC and 720p/1080p HDCVI, HDTVI and AHD test signals
- SD/HD switching: Direct mode switching supported
PTZ, Network and Electrical Testing
- RS-485 PTZ control: More than 30 protocols, including Pelco-D/P, Samsung, Panasonic, Lilin and Yaan
- RS-485 baud rates: 150, 300, 600, 1200, 2400, 4800, 9600 and 19200 bps
- Network diagnostics: IP address scanning and Ping testing
- PoE/PSE diagnostics: Voltage, data transmission and signal-strength information
- Network cable diagnostics: Length and attenuation testing
- Cable test range: 1–130 m; maximum distance varies with cable material
- Digital multimeter: AC/DC voltage, AC/DC current, resistance, capacitance, diode and circuit continuity testing
- RS-485 data monitor: Receive and display protocol data
- Audio testing: 1-channel audio input and 1-channel audio output
Connections and Interfaces
- Ethernet: 2 × RJ45, 10/100/1000 Mbps
- USB: 1 × Mini-B
- RS-485: 1 connection
- Audio: 1 input and 1 output
- Digital multimeter: 3 connection ports
- Camera power output: 12 V DC, 2 A
- Charging interface: PoE, IEEE 802.3af
Power and Battery
- Battery type: Dedicated, replaceable polymer lithium-ion battery
- Battery voltage: 7.4 V
- Battery energy: Up to 22.2 Wh
- Operating time: Approximately 8 hours under normal operating conditions
- PoE charging input: 48 V DC, 0.32 A
- Camera DC output: 12 V, maximum 2 A
Environmental and Physical Specifications
- Operating temperature: -10 °C to +55 °C
- Operating humidity: 30%–95% RH
- Casing colour: Yellow with black front controls
- Device dimensions: 193.0 × 115.0 × 37.1 mm (height × width × depth)
- Net weight: 0.54 kg
- Manufacturer-listed EMC compliance: CE EN 55032 and FCC Part 15 Subpart B
Manufacturer-Specified Package Contents
- Integrated Mount Tester
- Tester lanyard and tool bag lanyard
- Tool bag
- PoE power injector and charging cord
- Network cable and coaxial cable
- USB cable
- RS-485 cable and terminal
- Power output cord and audio cable
- Multimeter probes
- User manual













