Dahua Thermal Hybrid PTZ Camera – 10mm (4MP)
R20,499.00 Incl. VAT
The Dahua DHI-TPC-SD2241-B10F12-DW-S2 is a dual-channel thermal and visible-light network PTZ camera designed for medium-distance perimeter surveillance and heat detection. Combining a 10mm thermal lens, 12mm visible-light lens and 4MP optical imaging, it provides intelligent security monitoring in daylight, darkness and challenging lighting conditions.
- Thermal imaging: 256 × 192 vanadium oxide detector with a fixed 10mm lens and 17.3° horizontal × 13.1° vertical field of view.
- Visible-light imaging: 4MP (2336 × 1752) CMOS sensor with a fixed 12mm lens, 22° horizontal viewing angle and infrared illumination up to 50m.
- Intelligent perimeter protection: Tripwire and intrusion detection with human/vehicle classification; manufacturer reference distances of up to 70m for humans and 210m for vehicles under specified test conditions.
- Thermal analytics: Heat detection, hot/cold spot tracing, smoking detection and call detection, with integrated white-light and audible alarms.
- Motorised coverage: Continuous 360° pan, –15° to +90° tilt and 300 programmable presets.
- Network recording: H.265/H.264 compression, ONVIF interoperability and MicroSD storage up to 256GB (card sold separately).
- Power and installation: 12V DC or 802.3at PoE+, IP66 weather protection and an included PFB305W wall-mount bracket. The 12V power adaptor is optional.
Out of stock
Description
Dahua DHI-TPC-SD2241-B10F12-DW-S2 Thermal Hybrid Speed Dome Camera
Monitoring a distant boundary presents a different challenge from watching a driveway or building entrance. Conventional CCTV relies on visible detail and available illumination, while thermal imaging detects differences in emitted infrared radiation. The Dahua DHI-TPC-SD2241-B10F12-DW-S2 brings both technologies together in a motorised network speed dome, allowing an installer to monitor thermal activity and examine the same scene through a high-resolution visible-light channel.
This is the 10mm thermal lens variant, paired with a fixed 12mm visible-light lens. Its relatively narrow thermal viewing angle of 17.3° horizontally and 13.1° vertically makes it particularly suited to targeted, medium-distance surveillance of boundaries, access routes and other defined areas. Unlike the wider 3.5mm and 7mm variants in the SD2241 family, the 10mm configuration concentrates its thermal field of view on a smaller portion of the scene.
The thermal channel uses a 256 × 192 vanadium oxide detector with 12µm pixel pitch and thermal sensitivity of 40mK or better. It can reveal thermal contrast when conventional optical imaging is affected by darkness. Alongside it, the 4MP visible-light channel records at up to 2336 × 1752 pixels and incorporates infrared illumination with a manufacturer-rated range of 50m.
Thermal Detection Designed for Perimeter Protection
The SD2241 combines thermal analytics with Dahua’s intelligent video surveillance functions. Configurable tripwire and intrusion rules allow selected areas to be monitored for activity, while human and vehicle classification helps distinguish relevant targets from other movement.
For the 10mm lens, Dahua specifies optimal intelligent perimeter-protection distances of approximately 70m for humans and 210m for vehicles. These figures are based on defined target sizes and controlled environmental conditions. Actual performance depends on target dimensions, temperature contrast, weather, positioning and site conditions.
The camera also provides heat detection and hot/cold spot tracing. Dahua specifies a reference heat-detection distance of up to 123m using a 0.2m × 0.2m target under its stated test conditions. These capabilities can support the early investigation of unusual thermal activity, but should not be confused with calibrated temperature measurement or a certified fire-alarm system.
Additional intelligent functions include smoking detection and call detection. An integrated white-light and audible alarm can provide a local deterrent or warning response when configured with appropriate detection rules.
Thermal and Visible Imaging in One Moving Camera
Rather than requiring separate thermal and conventional cameras, the SD2241 supplies two complementary imaging channels in one housing. Thermal imaging helps identify heat signatures, while the visible channel provides optical detail for reviewing the monitored scene.
The camera supports thermal/visible image fusion and picture-in-picture display. Fusion modes help an operator interpret thermal information alongside the visible scene. An important configuration consideration is that the camera’s intelligent detection functions are automatically disabled when picture-in-picture mode is enabled.
The motorised assembly offers continuous 360° horizontal rotation and a vertical movement range from –15° to +90°. With 300 programmable presets, eight tours and configurable scan and pattern functions, the camera can be directed towards different observation points or operate through scheduled viewing sequences. Its motorised movement changes the viewing direction; the lenses themselves remain fixed-focal rather than providing optical zoom.
Network Integration and Installation
The DHI-TPC-SD2241 connects to a wired network through a 10/100Mbps RJ45 Ethernet interface. It supports H.265 and H.264 video compression, ONVIF interoperability and Dahua’s own network integration interfaces. Recorder compatibility, intelligent event handling and specific ONVIF functions should be checked against the intended recording system.
Local recording is supported through a MicroSD card of up to 256GB. A compatible memory card is purchased separately. The camera also provides two alarm inputs, one alarm output, audio input/output and RS-485 connectivity for integration into suitable professional surveillance installations.
Power is supplied through either 12V DC (±20%) or IEEE 802.3at PoE+. Its maximum published consumption is approximately 19.6W when powered by PoE, so the connected switch or injector must provide the required PoE+ power budget. A suitable 12V DC adaptor is optional rather than part of the manufacturer’s standard accessory list.
The IP66-rated housing is designed for outdoor deployment and operates across a specified temperature range of –30°C to +60°C. A PFB305W wall-mount bracket is supplied, while pole, corner and suspended-mount arrangements require the appropriate additional mounting components.
For installations where thermal awareness, intelligent perimeter events and steerable visible-light surveillance need to work together, the 10mm SD2241 offers a focused solution without requiring a separate thermal and optical camera at each monitoring position.
What’s in the Box
- 1 × Dahua DHI-TPC-SD2241-B10F12-DW-S2 Thermal Hybrid Speed Dome Camera
- 1 × Dahua PFB305W Wall-Mount Bracket
Downloads & Documentation
Specifications
Product Identification
- Brand: Dahua
- Model: DHI-TPC-SD2241-B10F12-DW-S2
- Series: Lite Series, TPC 2 Series
- Camera type: Thermal Network Hybrid Speed Dome Camera
- Thermal lens: 10mm fixed-focal
- Visible-light lens: 12mm fixed-focal
Thermal Imaging
- Detector: Uncooled vanadium oxide focal plane array
- Native thermal resolution: 256 × 192 pixels
- Pixel pitch: 12µm
- Spectral range: 8–14µm
- Thermal sensitivity (NETD): ≤40mK at F1.0
- Thermal focal length: 10mm
- Thermal field of view: 17.3° horizontal × 13.1° vertical
- Minimum focus distance: 1m
- Focus: Fixed
- Digital zoom: 16 levels
- Image enhancement: Digital Detail Enhancement (DDE)
- Noise reduction: 2D/3D
- Thermal AGC: Automatic/manual
- Thermal colour palettes: 18 selectable palettes
Visible-Light Imaging
- Image sensor: 1/2.7-inch CMOS
- Resolution: 4MP, 2336 × 1752 pixels
- Visible focal length: 12mm fixed-focal
- Visible field of view: 22° horizontal × 16.6° vertical
- Aperture: F2.0
- Minimum focus distance: 2.5m
- Minimum illumination: Colour 0.05 lux; black-and-white 0.005 lux; 0 lux with IR enabled
- Infrared illumination distance: Up to 50m
- Wide dynamic range: Digital WDR
- Day/night operation: Automatic ICR, colour or black-and-white
- Image processing: BLC, HLC, electronic defog and 2D/3D noise reduction
Thermal Detection and Analytics
- Perimeter analytics: Tripwire and intrusion detection
- Target classification: Human/vehicle
- Human IVS distance: Up to 70m under manufacturer test conditions
- Vehicle IVS distance: Up to 210m under manufacturer test conditions
- Heat detection reference distance: Up to 123m for a 0.2m × 0.2m target
- Theoretical thermal DRI detection: Human 417m; vehicle 1,278m
- Theoretical thermal DRI recognition: Human 104m; vehicle 319m
- Theoretical thermal DRI identification: Human 52m; vehicle 160m
- Additional analytics: Heat detection, hot/cold spot tracing, smoking detection and call detection
- Alarm response: Built-in white-light and audible alarm
- Image fusion: Thermal/visible fusion and picture-in-picture (intelligent functions disabled during PIP)
- Distance qualification: DRI figures are theoretical reference calculations; IVS and heat-detection distances depend on target size, environmental and installation conditions
PTZ Functions
- Pan: 0°–360° endless rotation
- Tilt: –15° to +90°
- Manual pan speed: 0.1°/s to 200°/s
- Manual tilt speed: 0.1°/s to 120°/s
- Preset speed: Pan 240°/s; tilt 200°/s
- Presets: 300
- Tours: 8, with up to 32 presets per tour
- Patterns: 5
- Scans: 5
- Power-off memory: Supported
- Privacy masking: 4 areas within the same view
Video, Audio and Storage
- Video compression: H.265, H.264, H.264H
- Visible main-stream resolution: Up to 2336 × 1752
- Thermal main-stream output: Up to 1280 × 960, digitally scaled from the 256 × 192 detector
- Frame rate: 1–25fps for both channels
- Audio compression: G.711a, G.711µ, PCM
- Two-way audio: Supported
- Local storage: MicroSD card, up to 256GB
- Memory card: Sold separately
Networking and Interfaces
- Ethernet: 1 × RJ45, 10/100 Base-T
- Interoperability: ONVIF, CGI, Dahua SDK
- Network protocols: HTTP, HTTPS, RTSP, RTP, TCP, UDP, DHCP, DNS, IPv4/IPv6, SNMP, NTP and additional supported protocols
- Alarm inputs: 2
- Alarm outputs: 1
- Audio input: 1
- Audio output: 1
- Analogue video output: 1 × CVBS, BNC
- RS-485: 1
- User accounts: Up to 10 users
Power and Environmental
- Power input: 12V DC ±20% or IEEE 802.3at PoE+
- Maximum consumption: <19.4W at 12V DC; 19.6W using PoE
- Ingress protection: IP66
- Operating temperature: –30°C to +60°C
- Operating humidity: ≤95%
- Surge protection: 6kV
Physical Specifications
- Camera dimensions: 295mm height × 160mm diameter
- Net mass: ≤3.2kg
- Included mounting accessory: Dahua PFB305W wall-mount bracket
- Optional accessories: PFA150 pole mounting accessory, PFA151 corner mounting accessory, PFA111/PFB300C hanging-mount components and PFM320D power adaptor












