Dahua Fingerprint & Mifare Access Reader – RS-485, IP65
R1,499.00 Incl. VAT
The Dahua DHI-ASR2102A is a compact, IP65-rated biometric access reader combining fingerprint recognition with 13.56 MHz Mifare card authentication. Designed for use with a compatible RS-485 access controller, it supports up to 3,000 fingerprints and provides a practical entry-point solution for controlled doors in commercial, residential and industrial installations.
- Dual authentication: Fingerprint recognition and 13.56 MHz Mifare Classic 1K IC card reading.
- Fingerprint capacity: Up to 3,000 fingerprints, with a recognition time of approximately 1.5 seconds.
- Card reading distance: 0–5 cm for convenient contactless access.
- Communication: RS-485 interface for integration with a compatible access controller.
- Security features: Tamper alarm, audible buzzer, status indicator and built-in watchdog.
- Outdoor protection: IP65-rated PC and acrylic enclosure, with silicone sealing required during installation.
- Compact construction: 70 × 70 × 26 mm surface-mounted design.
- Power requirement: 12 V DC, 0.5 A.
Installation requirement: This is a reader, not a standalone door controller. A compatible RS-485 access controller and suitable power supply are required for operation.
Description
Dahua DHI-ASR2102A Fingerprint & Mifare Access Reader
The Dahua DHI-ASR2102A brings two convenient identification methods together in a compact access reader. Employees, authorised visitors and residents can present a registered fingerprint or compatible Mifare access card, allowing an appropriately configured access control system to manage entry without relying on conventional keys.
Unlike a standalone fingerprint terminal, the ASR2102A operates as part of a wired access control installation. It reads the user’s credentials and communicates with an access controller through its RS-485 interface. The controller handles access verification and the associated door-lock operation. This makes the reader suitable for installations where access permissions and door hardware are managed through a central controller.
Fingerprint Recognition and Contactless Card Access
The integrated capacitive fingerprint sensor supports 1:N fingerprint verification, with a manufacturer-specified recognition time of approximately 1.5 seconds. The reader supports a fingerprint capacity of up to 3,000, making it suitable for access control installations serving multiple authorised users.
For card-based entry, the ASR2102A supports 13.56 MHz Mifare Classic 1K IC cards. Cards can be presented within a reading distance of approximately 0–5 cm, providing a straightforward alternative to fingerprint authentication. The available access permissions and authentication configuration are managed through the connected access control system.
A built-in buzzer and coloured status indicators provide immediate feedback during operation. The reader can indicate successful access, rejected credentials and communication problems, helping users and installers recognise the result of an access attempt.
Compact Reader for Indoor and Outdoor Entrances
Measuring only 70 × 70 × 26 mm, the square reader is designed for surface mounting alongside entrance doors, controlled gates and access points where a discreet reader is preferred.
Its polycarbonate construction and acrylic front panel provide an IP65 ingress protection rating, supporting indoor and outdoor installations when correctly fitted. Dahua specifies the use of silicone sealant during installation to achieve the stated protection. Outdoor positioning should therefore consider proper sealing, cable entry protection and the mounting environment.
The operating temperature range of -20°C to +65°C accommodates a wide range of installation conditions. An integrated tamper alarm provides additional protection against interference with the reader, while overcurrent and overvoltage protection safeguard its connection ports.
RS-485 Integration and Installation Requirements
The DHI-ASR2102A uses a dedicated RS-485 communication connection rather than operating as an independent networked door controller. A compatible access controller must be provided to manage the reader and operate the associated locking equipment.
The reader requires a 12 V DC, 0.5 A power supply, with working power consumption specified at no more than 1.7 W. Dahua’s installation guidance specifies an RS-485 cable run of up to 100 m when the applicable cable requirements are met, with suitable shielded cabling recommended.
The built-in watchdog monitors abnormal operating conditions and supports automatic recovery, helping maintain reliable operation within the connected access control system.
Important: This model is the 13.56 MHz Mifare version of the ASR2102A. The separate ASR2102A-D is intended for ID card operation. Confirm the existing access controller’s RS-485 reader compatibility and the access card technology before ordering.
Specifications
- Brand: Dahua
- Model: DHI-ASR2102A
- Product Type: Fingerprint and IC card access reader
- Application: Indoor and outdoor access control
- Card Technology: Mifare Classic 1K IC card
- Card Frequency: 13.56 MHz
- Card Reading Distance: 0–5 cm
- Unlock Methods: Card or fingerprint authentication
- Fingerprint Sensor: Capacitive
- Fingerprint Verification: 1:N
- Fingerprint Capacity: 3,000
- Fingerprint Recognition Time: 1.5 seconds
- Response Time: 0.1 seconds
- Communication Interface: 1 × RS-485
- RS-485 Cable Length: Up to 100 m, subject to installation requirements
- Card Modulation: AM
- Maximum Transmission Power: 42 dBµA/m at 10 m
- Audible Indicator: Built-in buzzer
- Visual Indicator: Status indicator light
- Tamper Alarm: Supported
- Watchdog: Built-in abnormal-operation detection and recovery
- Electrical Protection: Overcurrent and overvoltage protection on connection ports
- Power Supply: 12 V DC, 0.5 A
- Standby Consumption: ≤ 1.0 W
- Working Consumption: ≤ 1.7 W
- Ingress Protection: IP65; silicone sealing required for the rated protection
- Operating Temperature: -20°C to +65°C
- Operating Humidity: 5–95% RH, non-condensing
- Housing: Polycarbonate with acrylic front panel
- Installation: Surface mounting
- Device Dimensions (L × W × H): 70 × 70 × 26 mm
- Manufacturer-Stated Gross Weight: 0.17 kg
- Certifications: CE, FCC
- System Requirement: Compatible RS-485 access controller











