Dahua 4-Door 2-Way Network Access Controller with Metal Enclosure
R5,995.00 Incl. VAT
The Dahua DHI-ASC2204C-D is a professional four-door, two-way network access controller designed for credential-controlled entry and exit. Supporting up to eight connected card readers across four doors, it is suited to commercial buildings, offices and secure facilities where both entry and departure require access authorisation and event recording.
- Four-door, two-way access: Supports up to eight readers, allowing one entry reader and one exit reader per door.
- Reader connectivity: Nine RS-485 ports, eight Wiegand ports and OSDP protocol support.
- Large user capacity: Stores up to 100,000 users, 100,000 cards, 3,000 fingerprints and 500,000 access records.
- Multiple authentication methods: Supports card, password, fingerprint and remote unlocking with suitable connected readers and management equipment.
- Advanced access rules: Includes anti-passback, multi-door interlocking, multi-user unlocking, first-card unlocking and remote verification.
- Extensive alarm integration: Eight alarm inputs, eight relay alarm outputs, four lock-control channels and individual door-status monitoring.
- Wired network management: 10/100 Mbps Ethernet connectivity for integration into a centralised access control system.
- Enclosed power arrangement: SECC steel cabinet with 100–240 V AC mains input and backup battery support.
- Indoor installation: Surface-mounted enclosure, IP20 and IK04 rated, measuring 337 × 272 × 90 mm (H × W × D).
Installation requirement: Suitable access readers, electric locks, door contacts, exit buttons where required, and appropriate cabling must be selected separately for the intended access system. The controller requires mains power and is not powered by PoE.
Out of stock
Description
Dahua DHI-ASC2204C-D 4-Door Two-Way Access Controller
In a building where security depends on knowing not only who enters but also who leaves, a conventional entry-only access controller may not be sufficient. The Dahua DHI-ASC2204C-D provides credential-controlled access in both directions across four doors, allowing an organisation to manage entry and exit permissions while maintaining a detailed record of access events.
Unlike the one-way ASC2204C-S, which supports four readers, the ASC2204C-D accommodates up to eight access readers with four independent lock-control channels. Each controlled door can therefore be equipped with a reader on its entry side and another on its exit side. This arrangement is valuable in offices, secure departments, industrial facilities and buildings where movement through controlled areas needs to be restricted or monitored in both directions.
The controller supports a substantial database of 100,000 users, 100,000 cards and 3,000 fingerprints, together with storage for up to 500,000 access records. These capacities make it suitable for multi-user environments where administrators need to manage numerous credentials, permissions and access histories from a central system.
Eight Reader Connections Across Four Controlled Doors
The ASC2204C-D provides nine RS-485 communication ports and eight Wiegand ports, supporting compatible reader configurations using either interface. OSDP protocol support provides an additional communication option for suitable reader equipment.
Each door has its own lock-control channel and door-status monitoring input. The controller also provides four exit-button inputs, allowing an installation to incorporate conventional exit controls where appropriate without changing its two-way reader capability.
Supported authentication methods include card swiping, passwords, fingerprints and remote unlocking. Multiple authentication functions allow more restrictive access arrangements to be configured where a single credential is not sufficient.
Advanced Access Rules for Secure Areas
The ASC2204C-D includes anti-passback, an important function in access systems where credential reuse or incorrect movement sequences need to be controlled. With correctly installed readers on both sides of the doors, the system can use recorded entry and exit activity to enforce configured access rules.
Multi-door interlocking helps coordinate access between designated doors, while multi-user unlocking allows an authorised group combination to be required for specific access events. This is useful where an opening should not be controlled by a single individual.
First-card unlocking, remote verification and blocklist/allowlist management offer further flexibility. The controller supports 128 access time periods and 128 holiday periods, allowing permissions to be configured around business hours, shift arrangements and planned closures.
Alarm Monitoring and Access Event Records
Beyond operating door locks, the ASC2204C-D provides eight digital alarm inputs and eight relay alarm outputs for connection to appropriate monitoring and security equipment. Alarm linkage allows configured events to produce corresponding output actions.
Supported alarm conditions include reader tampering, intrusion, door-unlock timeout, duress and excessive invalid-card attempts. These functions help administrators identify abnormal access activity rather than relying solely on successful credential transactions.
A built-in real-time clock supports accurate event timing, while stored information is retained during power failure. Online firmware updating and a watchdog mechanism support the controller’s continued operation within the access control network.
Network, Power and Installation Considerations
The controller connects to the site’s wired network through a 10/100 Mbps Ethernet interface and can communicate with a suitable central access management platform. Its four-door architecture keeps door-control hardware centrally located while individual readers and locking devices are installed at the appropriate entrances and exits.
The ASC2204C-D is supplied in a steel enclosure with an AC-powered controller arrangement, accepting 100–240 V AC. Maximum specified working consumption is 39.6 W. Backup battery operation is supported, allowing the system design to include a suitable battery for continued operation during mains interruptions.
The enclosure measures 337 mm high, 272 mm wide and 90 mm deep. It is intended for indoor, surface-mounted installation, with IP20 ingress protection and IK04 impact resistance. The cabinet should be positioned in a protected equipment location with suitable access for wiring, maintenance and power connections.
A complete installation requires appropriately selected access readers, locking devices, cabling and door monitoring components. The installer must also provide suitable emergency egress and fire-safety arrangements for the lock type and building application.
Model selection: Choose the ASC2204C-D when credentials must be checked on both entry and exit. Where only entry requires a reader and users leave through a conventional exit button, the one-way ASC2204C-S may offer a more economical alternative.
What’s in the Box
- 1 × Dahua DHI-ASC2204C-D four-door access controller with steel enclosure and mains power supply.
Specifications
Product Information
- Brand: Dahua
- Model: DHI-ASC2204C-D
- Series: ASC2 Series
- Product Type: Network access controller
- Door Capacity: 4 doors
- Access Direction: Two-way (entry and exit)
- Maximum Reader Channels: 8
- Main Processor: Embedded processor
System Capacity
- User Capacity: 100,000
- Card Capacity: 100,000
- Fingerprint Capacity: 3,000
- Event Record Capacity: 500,000
- Access Time Periods: 128
- Holiday Periods: 128
- User Types: General, VIP, patrol, guest, blocklist and other users
Communication and Interfaces
- Network Interface: 1 × 10/100 Mbps Ethernet port
- Network Protocols: IPv4, TCP, UDP
- RS-485 Ports: 9
- Wiegand Ports: 8
- Peripheral Reader Support: 8-channel RS-485 or 8-channel Wiegand reader configuration
- OSDP Protocol: Supported
- SDK: Supported
- Network Firmware Updates: Supported
Access Control Functions
- Unlock Methods: Card, password, fingerprint and remote
- Anti-Passback: Supported
- Multi-Door Interlocking: Supported
- Multi-User Unlocking: Supported
- First-Card Unlocking: Supported
- Remote Verification: Supported
- Multiple Authentication: Supported
- Group Authentication: Card, password and fingerprint combinations
- Blocklist and Allowlist: Supported
- Real-Time Monitoring: Supported
- Built-in Real-Time Clock: Yes
- Watchdog Mechanism: Supported
- Data Retention During Power Failure: Supported
Door Control and Alarm Interfaces
- Lock Control: 4 channels, normally open by default
- Exit-Button Inputs: 4
- Door-Status Inputs: 4
- Alarm Inputs: 8 digital inputs
- Alarm Outputs: 8 relay outputs
- Alarm Linkage: Supported
- Reader Tamper Alarm: Supported
- Intrusion Alarm: Supported
- Door Unlock Timeout Alarm: Supported
- Duress Alarm: Supported
- Excessive Invalid-Card Alarm: Supported
- Duress Fingerprint Alarm: Supported
- Built-in Buzzer: Yes
Electrical Specifications
- Input Power: 100–240 V AC
- Standby Power Consumption: ≤ 0.8 W
- Working Power Consumption: ≤ 39.6 W
- Backup Battery Support: Yes
- Power over Ethernet: Not supported
Physical and Environmental Specifications
- Enclosure: Type C steel cabinet
- Enclosure Material: SECC steel
- Dimensions: 337 × 272 × 90 mm (H × W × D)
- Mounting: Surface mount
- Installation Environment: Indoor
- Ingress Protection: IP20
- Impact Protection: IK04
- Operating Temperature: −30 °C to +60 °C
- Operating Humidity: 5%–95% RH, non-condensing
- Gross Packaged Weight: 3.5 kg
- Manufacturer-Listed Certifications: CE, FCC, UL











