Dahua Wireless Outdoor Alarm Siren – Blue, 110dB, IP65
R1,599.00 Incl. VAT
The Dahua DHI-ARA13-W2(868B) is a blue-strobe wireless outdoor siren for compatible Dahua AirShield alarm systems. It combines a loud audible warning with a flashing blue visual alarm, helping draw attention to intrusions, panic activations and other configured alarm events.
- Powerful alarm: Up to 110 dB(A) rated sound pressure with 12 alarm LED groups and a blue warning light.
- 868 MHz wireless: Two-way communication with frequency hopping and AES-128 encryption.
- Long-range connection: Up to 1,600 m in unobstructed open-space conditions.
- Outdoor protection: IP65-rated enclosure with an operating temperature range of -25°C to +60°C.
- Flexible power: Operates using four CR123A batteries or an external 9–15 V DC supply.
- Extended battery operation: Up to approximately 3.4 years under Dahua’s specified usage conditions.
- Security monitoring: Case and wall tamper detection, low-battery alerts and wireless signal-strength monitoring.
- Multiple warning sounds: Supports intrusion, fire, medical, panic and other configurable alarm events.
System requirement: Requires a compatible Dahua 868 MHz wireless alarm hub. This is an additional alarm siren, not a standalone alarm system.
Out of stock
Description
Dahua DHI-ARA13-W2(868B) Wireless Outdoor Siren – Blue
An alarm system needs to do more than detect a break-in. It also needs to make the event immediately noticeable. The Dahua DHI-ARA13-W2(868B) adds a powerful outdoor sounder and flashing blue warning light to a compatible Dahua AirShield wireless alarm installation, providing an audible and visible response when the alarm hub activates it.
This particular variant features a blue alarm light, distinguishing it from the red and orange versions in the ARA13-W2 range. Its wall-mounted, IP65-rated enclosure is designed for outdoor use, making it suitable for positioning where an alarm needs to attract attention beyond the building.
Audible and Visual Warning for Different Alarm Events
The ARA13-W2(868B) combines a single buzzer with 12 alarm LED groups. Dahua specifies a high-volume sound pressure rating of up to 110 dB(A), with a measured high-volume level of 95.2 dB(A) at 1 metre in an anechoic chamber.
Rather than relying on one warning tone for every situation, the siren supports multiple alarm sounds associated with different events, including intrusion, fire, medical emergencies and panic activations. These sounds are controlled through the connected alarm system, allowing different warning responses to be configured according to the installation.
The blue flashing light provides an additional visual indication, particularly useful where a warning may need to be recognised quickly or where background noise makes an audible siren less noticeable.
Wireless Communication Without a Dedicated Signal Cable
The siren communicates with its alarm hub on the 868.0–868.6 MHz frequency band, using two-way wireless communication, frequency hopping and AES-128 encryption.
Two-way communication allows the siren to receive alarm instructions and report device information to the system. Frequency hopping helps maintain reliable communication in environments where radio interference may otherwise disrupt a fixed-frequency connection.
Dahua specifies a maximum wireless communication distance of 1,600 metres in open space. This is a manufacturer test-condition figure rather than a guaranteed installed range. Walls, reinforced concrete, metal structures, installation position and surrounding interference will affect actual performance.
The siren also supports wireless signal-strength detection, allowing the installer to assess reception before finalising the mounting position.
Battery Operation or External DC Power
Installation is flexible because the unit supports two power arrangements:
- Battery power: Four CR123A batteries provide operation without a permanent power cable.
- External power: A regulated 9–15 V DC supply can be connected where suitable wiring and power are available.
With four CR123A batteries, Dahua specifies a battery operating life of approximately 3.4 years, based on an alarm sounding for 120 seconds every fortnight and an assumed battery efficiency of 80%. Actual replacement intervals depend on battery quality, alarm frequency, operating temperature and other installation conditions.
Low-battery reporting helps the alarm system identify when maintenance is required. The device also supports case and wall tamper detection, providing an additional warning if someone attempts to interfere with the siren.
Outdoor Installation and Alarm System Setup
The enclosure measures 200 × 200 × 52.5 mm and uses a durable PC and ABS housing. Its IP65 protection rating provides resistance to dust ingress and water jets, while the specified operating temperature range of -25°C to +60°C supports installation in a range of outdoor environments.
During setup, the siren is powered on and paired with the compatible Dahua wireless alarm hub. Signal-strength checking can then be performed before the unit is securely wall-mounted. Supported settings are managed through the Dahua alarm system and associated application.
The device also supports remote firmware updates through the Dahua cloud, including automatic recovery functionality following an unsuccessful update.
Important compatibility requirement: The DHI-ARA13-W2(868B) is an 868 MHz alarm accessory and requires a compatible Dahua AirShield wireless alarm hub. It cannot independently detect intrusions or operate as a complete security alarm system.
Downloads & Documentation
Specifications
Product Information
- Brand: Dahua Technology
- Model: DHI-ARA13-W2(868B)
- Product Type: Wireless External Alarm Siren
- Series: Dahua AirShield
- Variant: Blue warning light
- Application: Outdoor / Indoor
Alarm and Security Functions
- Audible Alarm: 1 × buzzer
- Rated Sound Pressure: Up to 110 dB(A)
- Measured Sound Pressure: 95.2 dB(A) at 1 metre in an anechoic chamber, high-volume setting
- Visual Alarm: 12 × alarm LED groups with blue warning light
- Status Indicator: 1 × green indicator
- Alarm Sounds: Fire, medical, intrusion, panic and other supported events
- Power Switch: 1 × on/off switch
- Case and Wall Tamper Detection: Supported
- Low-Battery Detection: Supported
- Wireless Signal-Strength Detection: Supported
- Remote Firmware Updates: Cloud update with automatic recovery support
Wireless Communication
- Wireless Frequency: 868.0–868.6 MHz
- Communication Type: Two-way wireless
- Maximum Communication Distance: Up to 1,600 m in open space
- Transmit Power: Maximum 25 mW EIRP
- Frequency Hopping: Supported
- Encryption: AES-128
- System Requirement: Compatible Dahua 868 MHz AirShield wireless alarm hub
Power and Battery
- Power Supply: 4 × CR123A batteries or external 9–15 V DC
- Battery Type: CR123A
- Estimated Battery Life: Up to 3.4 years under specified test conditions
- Battery-Life Test Conditions: 120-second alarm activation once every fortnight, assuming 80% battery efficiency
- Low-Battery Threshold: 2.8 V DC
- Battery Recovery Threshold: 2.9 V DC
- Battery Operating Current: 1.4 A maximum; 92 µA standby at 3 V
- External DC Operating Current: 1 A maximum; 7.3 mA standby at 12 V DC
- Maximum Power Consumption: 4.2 W on battery power; 12 W on DC power
Construction and Environmental
- Mounting: Wall mount
- Enclosure Material: PC + ABS
- Ingress Protection: IP65
- Operating Temperature: -25°C to +60°C
- Operating Humidity: 10%–90% RH
- Product Dimensions (L × W × H): 200 × 200 × 52.5 mm
- Net Weight: 610 g
- Security Classification: EN 50131 Grade 2, Environmental Class IV
- Certification: CE













